Power flush

 Plumbing on Tap do not cut any corners on a powerflush! A full day is spent flushing the system and using the best chemicals. We clean through the central heating system pipe work and all central heating radiators at the property. Only one radiator must be taken off the wall in order for the powerflush to take place..

Power flush machine set up so water flows through the radiators and heating pipe work collecting all the iron oxide sludge, before reaching the boiler to minimise debris entering boiler heat exchanger.

Rust remover chemical (normally phosphoric acid based, an ingredient in Cola drinks and why a rusty coin is cleaned by Cola) is added and boiler turned on.

By concentrating flow through individual radiators and vibrating the radiators the rust spots are removed.

One by one radiators, heating coils and all pipe work are power flushed with clean water until water samples show clean and neutral readings.

Small amount of Neutraliser is added to compensate for residual chemical cleaner, then Rust Inhibitor is added and circulated throughout the system.

The Power flush machine is removed and central heating system reinstated. Heating is turned on and the radiators are balanced to optimise system efficiency.

• Full system powerflush with chemicals
• Powerflush always done with new/upgrade boiler installs to comply with the manufacturers guarantee

Do you need a powerflush?

Benefits after having a powerflush