Products And Services

Whether it’s replacing a leaking tap, carrying out planned or emergency response plumbing, heating or drainage, 24 hours a day, 7 days a week – We promise that we will work tirelessly at all times, to provide you with the same high standard of service that our reliable and trustworthy reputation has been built upon

 
 

Central Heating 

We offer a range of boilers to suite you the customer needs, whether it is for your own home, a development or investment property. Plumbing on Tap have extremely high standards when it comes to new boilers and central heating systems. Contact us for a free estimate.

  • Full central heating installations & System Design
  • Boiler Installations/upgrades
  • Heating controls and switches
  • Gas Appliance installation (Hobs, Cooker, Fire Places++)
  • New Radiators & Upgrades
  • Radiator thermostatic valves
  • Wireless room stat
  • Install new unvented hot water cylinders
  • Flu less gas fires
  • Warm Air units
 

Repair boilers 

Plumbing on Taps Gas Safe Registered engineers are fully equipped to investigate the boiler fault as quick as possible. Their vans are stocked with parts to save time which of course keeps our prices low for the customer. If parts need to be replaced the engineer will work out a price and await confirmation before installing the new part.

  • Fault finding when -
  • No heating or hot water problems
  • Pilot light going out
  • Boiler locking out
  • Noisy boiler when in operation
  • Low water pressure
  • Part Repair
  • Part replacements & install into boiler
  • Re pressure boiler including venting all radiators
  • Immersion heaters
 

Boiler maintenance 

Our boiler service takes between 1 hour and 1 hour 30 minutes depending on which boiler and access. It is recommended by manufactures that a boiler service should be carried out every 12 months and is mandatory for extended warranties.

  • Boiler service 18 check point clean and visual inspection
  • Gas Fire servicing
  • Call outs to any problems with the boiler
 

Gas safety inspection 

 We are on average £20.00 cheaper than our competitors!

Gas safety inspections can be done at any property, not necessarily a rented property. It is the law for a landlord to have a gas safety inspection every 12 months in any rented property he or she owns. Certificates can now be sent via email directly from the property.

A Plumbing on Tap Gas Safe Register registered engineer will check the following during a Landlord gas safety inspection:

  • Check appliance for gas tightness.
  • Check standing and working pressure if test points available.
  • Check burner pressure / gas rate against manufacturers data plate.
  • Check for satisfactory provision of all necessary ventilation.
  • Test flue flow to ensure removal of products of combustion.
  • Check satisfactory operation of all the flame failure devices.
  • Check for physical stability, presence and effectiveness of stability brackets (where appropriate).
  • Investigate any evidence of unsafe operation and report to a responsible person. An appliance can not be deemed as having been checked, until the above has been completed.
  • A tightness test of the full system should be added to the above.

 

Gas appliances are as follows -

  • Boiler
  • Hob
  • Cooker
  • Fire
  • Warm Air
 

Fix leaking pipes 

24 hours, 7 days a week, 365 days a year! If you have a leak whether its an emergency or a small drip, we offer round the clock service. Our team of plumbers and engineers hold stock and can get to you with our rapid response to emergencies!

  • Investigation to locate cause of leak
  • All pipe work undertaken
  • Burst Pipes
  • Change section of corroded pipe work and joints
 

Taps & toilets 

„Drip! Drip! Drip!” That annoying Tap that won’t stop dripping, or the toilet that won’t flush can by any of our fully qualified team of plumbers

  • Tap leaking
  • Dripping Tap
  • New Washers
  • Tap service
  • New taps install/replacement
  • New toilet installation
  • Toilet leaks
  • Flushing problems
  • Broken handle
  • Syphon
  • Ball valve
  • Stop noisy sounds
  • Saniflows
  • New toilet seats
 

Tanks & overflows 

Over time tanks split, rust or over time wear and tear can course a dramatic leak and potentially flood your property causing major damage. It is important to get fast response, stop the leak and diagnose the exact problem. Our plumbers carry stock to help with the speedy repair. Full quotes for new tanks are given if a replacement is needed.

  • Replace Ball Valves
  • New Overflows
  • New tanks
  • Loft Tanks
  • Lagging of Tanks
  • Repair to leaking tank
  • Noisy tanks
 

Unblock drains 

No job is too big for our drainage department, with the best equipment and 15 years experience in drainage we guarantee to unblock your blockage.

  • Full investigation to locate blockage
  • Roding, Plunging
  • Professional equipment with camera and pressure machine (Jetting)
  • Blocked toilets
  • Slow drainage bath and sinks
  • Blocked sinks
 

Power flush 

 Plumbing on Tap do not cut any corners on a powerflush! A full day is spent flushing the system and using the best chemicals. We clean through the central heating system pipe work and all central heating radiators at the property. Only one radiator must be taken off the wall in order for the powerflush to take place..

Power flush machine set up so water flows through the radiators and heating pipe work collecting all the iron oxide sludge, before reaching the boiler to minimise debris entering boiler heat exchanger.

Rust remover chemical (normally phosphoric acid based, an ingredient in Cola drinks and why a rusty coin is cleaned by Cola) is added and boiler turned on.

By concentrating flow through individual radiators and vibrating the radiators the rust spots are removed.

One by one radiators, heating coils and all pipe work are power flushed with clean water until water samples show clean and neutral readings.

Small amount of Neutraliser is added to compensate for residual chemical cleaner, then Rust Inhibitor is added and circulated throughout the system.

The Power flush machine is removed and central heating system reinstated. Heating is turned on and the radiators are balanced to optimise system efficiency.

  • Full system powerflush with chemicals
  • Powerflush always done with new/upgrade boiler installs to comply with the manufacturers guarantee

Do you need a powerflush?

 

  • Cold spots in the radiator usually the bottom area
  • Noisy system
  • Brown and orange water stains from the radiator
  • Blocked system pipes
  • Un even circulation of heat to the radiators

Benefits after having a powerflush

  • Proven to increase the life of the boiler
  • To help run the heating system quickly and efficiently
  • To maintain a boiler warranty and guarantee
 

Bathrooms & showers 

There are many different things that can go wrong with showers, but we can repair and prevent leaks on all types. If you need or are thinking of having a new shower/bath our team can help you get the best for your money and offer free advice on positioning and design.

  • Full installation and system design on new suites
  • Electric showers
  • Mixer showers
  • Repairs to Showers & Pumps
  • Installation of new showers
  • New pumps
  • Shower doors
  • Re Silicone
  • Plugs
  • Shower leaks
  • Bath waste leaks
  • Shower heads and hose replacements

Don’t get caught out

before the next big freeze!

up to £500 off a new boiler,
Summer online special offer!

 

Don’t Delay Call Today
Only £25.00 + VAT

All payments can be made by cash, cheque or card. Card payments can be made at our office or by telephone.