Money Saving Advice: High Energy Prices in the UK
Another season, come and gone. As the last autumn leaves crunch and crumble underneath ...
Brighton Gas Safety Inspection Services
We are on average £20.00 cheaper than our competitors!
Gas safety inspections can be done at any property, not necessarily a rented property. It is the law for a landlord to have a gas safety inspection every 12 months in any rented property he or she owns. Certificates can now be sent via email directly from the property.
A Plumbing on Tap Gas Safe Register registered engineer will check the following during a Landlord gas safety inspection:
- Check satisfactory operation of all the flame failure devices.Check for physical stability, presence and effectiveness of stability brackets (where appropriate).
- Investigate any evidence of unsafe operation and report to a responsible person. An appliance can not be deemed as having been checked, until the above has been completed.
- A tightness test of the full system should be added
- Check appliance for gas tightness.
- Check standing and working pressure if test points available.
- Check burner pressure / gas rate against manufacturers data plate.
- Check for satisfactory provision of all necessary ventilation.
- Test flue flow to ensure removal of products of combustion.
- Check satisfactory operation of all the flame failure devices.
- Check for physical stability, presence and effectiveness of stability brackets (where appropriate).
- Investigate any evidence of unsafe operation and report to a responsible person. An appliance can not be deemed as having been checked, until the above has been completed.
- A tightness test of the full system should be added to the above.
Our Services: Gas Safety Inspections
One of our committed gas safe registered registered engineers can carefully inspect your boiler and its gas pipe work to ensure it is operating properly. Inspections can also be carried out on any of your gas appliances in your property, including gas fireplaces, cookers, and hobs.
Gas Safety Certificates
Gas safety inspections are required every 12 months on all gas appliances in properties that you let. These inspections ensure you hold a valid gas safety record. After one of our engineers inspects your gas appliances, they will conveniently issue a gas safety certificate directly from the property by email. The inspection will not only ensure you are in compliance with your legal requirements, but will also keep your property and tenants safe.
Landlords & letting agents
We have been ensuring tenants are safe in rented accommodation for over 5 years, working for independent landlords and most of our local letting agents. Prices are from £50 + VAT. Our promise to you is that we take gas safety extremely serious and our number one priority is the tenants safety without compromise.
Putting Safety First Servicing
During their detailed inspection, a Plumbing On-Tap engineer will ensure that the gas appliance is being operated safely and that it is functioning properly. They will undertake a tightness test of the full system and check the appliance to ensure there are no gas leaks.
Our engineers will also carry out a flue flow test to ensure potentially dangerous gases are being vented properly. Engineers will also check the standing and working pressure, the burner pressure and gas rate, the physical stability of the unit, and any flame failure devices to ensure that the appliance is operating within the manufacturer’s specifications.
Gas Safer Registered Engineers
Plumbing On-Tap is committed to safety. All our gas engineers are fully trained and Gas Safe registered, and they are qualified to work on all types of gas appliances. Any person working on gas appliances must be registered with the Gas Safe Register. When you contract Plumbing On-Tap you can be assured that you will be working with trusted and reliable professionals that make safety their priority. To learn more about the Gas Safe Register, visit www.gassaferegister.co.uk.
Making Customer Service a Priority
Our professional engineers are committed to providing unmatched customer services. As part of our gas safety inspection service, we provide you with flexible appointments that are scheduled by the hour. You will never be left waiting for one of our gas engineers to arrive at your property to complete an inspection.
Emergency Plumbers in Brighton
Schedule an Inspection Today!
We provide gas safety inspections at competitive and affordable rates. An inspection can be completed for just £20 pounds (plus VAT) when you have a boiler service. Call us today to schedule a gas safety inspection on 01273 723600 in Brighton or 01903 660093 in Worthing, or email us at office@ontap-group.com.
Frequently Asked Questions
If you own or use any equipment that works with gas, it is your responsibility to make sure that your home is safe. A gas safety inspection will detect if you have gas-related problems and offer suggestions on how you can resolve them. At the end of the inspection, you will be given a Gas Safety Certificate to show that your gas appliances and home are safe. The certificate shows that comply with the health and safety laws concerning the use of gas in the house and that your property is safe for people to live in. This certificate is typically valid for 12 months. This means that you should carry out gas safety inspections every 12 months.
Call us on 01273 723 600 if you need a Gas Safe Registered inspector to carry out a gas inspection on your property.
During a regular gas safety inspection, a number of checks will be made to make sure that your home appliances and gas equipment are safe for use. Our Gas Safe expert will check your boiler and the hot water cylinder (if you have one). While the gas safety inspector may not be able to carry out certain repairs on the spot, the inspector will check gas equipment such as gas cookers and ovens, gas mains, gas lines and any other equipment or appliance that uses gas to function.
If any equipment is deemed unsafe, that equipment will be disconnected from the gas mains as a security measure, and you will be informed so that you can have it serviced by a Gas Safe engineer.
The key to gas safety is regular inspections. Even if you have a gas alarm, it is important that you also carry out regular gas inspections to ensure that your home is safe. A typical gas safety check should take between 20 to 30 minutes. However, if there is need to carry out repairs, it may take longer. Remember that all gas checks must be done by a Gas Safe registered engineer. These are people who are trained to work in the particular field of gas.
All our engineers at Plumbing on Tap are Gas Safe Registered. You can call us on 01273 723 600 to find out more.
Plumbing on Tap is Gas Safe Registered. This means that we can be found in the register containing individuals and companies certified to carry out gas safety inspections. The Gas Safety Register is the official body that registers and regulates all gas engineers in the UK, the Isle of Man and Guernsey. This body is set up by the health and safety authorities in these areas. While a non-registered engineer can carry out basic work such as fixing a pipe or installing a radiator, any work on the gas boiler itself or gas-related procedure must be carried out by a Gas Safe registered and certified engineer.
All our engineers carry the Gas Safety Register card and can show it on request.
Emergency Plumbing call out at short notice. Problem sorted quickly and efficiently. Excellent service.
Turned up on time, courteous, friendly, finished the job efficiently (boiler service), charged what I was quoted. Recommended.
Fantastic service from start to finish. Will defiantly recommend this company and use them again.
Quick response time which was great as water was pouring out from under my sink, very quick to fix the problem, tidy and courteous engineer, would highly recommend for anyone in need of a plumber, Top job.
Excellent customer service and knowledgeable tradesman. Work carried out with minimum fuss and felt comfortable from the word go.
Have used plumbing on tap for a new boiler and annual check ups. Very helpful and thorough would use them again and recommend to others.
Plumbing on tap have always been super efficient, I have never had to ask for something to be redone, and once they have the job I don't need to chase them which is handy considering I run a busy letting agency..
Fixed my kitchen tap, fixed a leak in my bath, dispatched a handyman to re-grout my bath. Excellent work. Very satisfied!!
Such a lifesaver!! They came out to us right away, and were very friendly and helpful and explained what was wrong with our boiler. Will definitely be using them in future again! Thank you so much!
Great company and highly recommended. Flexible to suit my busy schedule and came when I needed them too. Did a great job at a reasonable price; quick and efficient in the process and no hidden extras at the end. Would definitely use again.
A responsive time, good job at a fair price. That was all I asked for and that was what I got. So I am happy to recommend Plumbing On Tap, even if they did end up sharing the Hove Business Award for Best Professional Service, with me! Thanks aga...
Super great service today! Gavin installed my curtains and did a brilliant job, super friendly and lovely guy will defiantly use Ontap and highly recommend!
Excellent service, lovely people.
Information About Brighton
- Plumbing Ontap is proud to offer Gas Safety Inspection Services in Brighton, a large town located in East Sussex in South East England.
- Part of the Brighton and Hove built-up area, Brighton is located in the City of Brighton and Hove, a Unitary Authority in Sussex.
- A large number of leading businesses make Brighton and East Sussex their home including Plumbing Ontap.
- Brighton used to be called Brighthelmstone.
- The nicknames Brighthelmstone & Blightey are still commonly used.
- Brighton is formed by a number of villages and settlements including Coldean,Bevendean, Aldrington, Old Steine, Black Rock, Hangleton and Bevendean.
- Plumbing Ontap’s Gas Safety Inspection service area in the City of Brighton and Hove also encompasses Hollingbury, Hollingdean, Hove, Mile Oak and Moulsecoomb.
- Other service areas of Plumbing Ontap within in Brighton, Sussex accommodate Portslade-by-Sea, Saltdean, Ovingdean, Patcham and Rottingdean,
- in addition to Brighton and Hove’s outer urban areas Woodingdean, Withdean, Westdene and West Blatchington.
- Just as importantly, Finally yet importantly, Plumbing Ontap’s Gas Safety Inspection Services cover the Brighton Municipality along with Bear Road area, Stanmer and Brighton Marina.
- Brighton comes under the BN postcode area.
- The University of Brighton and Sussex University are prestigious through out the United Kingdom.
- Queen’s Park, Brighton and Preston Park, Brighton are most notable parks in Brighton and known through out England.
- Connecting Brighton to other major populations are the A23 road and A27 road.
- The town of Brighton and Hove is bordered by Littlehampton, Shoreham, Worthing, Lancing, Sompting and Southwick to the West.
- The town of Brighton is bordered by Lewes, Burgess Hill and Peacehaven to the East.
Related blog Posts
November 14, 0204
May 14, 2011
Eddie Gibson Charity Football Match
Our very own Elliott Raggio will be playing in a charity football match next ...
January 14, 2012
Gas Safety Week
Gas Safety Week coming 10th September -16th September. Don’t be fooled by cowboy fitters ...
February 14, 2012
Another Milestone
Today we were presented with a certificate from the offices of Checkatrade for collecting ...
